Process control, do a good job in every detail

Shanxi Shida Forging Co., Ltd

It has 3 forging equipment, 30 machining equipment, and annual production capacity of 9000 tons.

Forging classification, characteristics and equipment used

Forging is a processing method that uses forging machinery to apply pressure to metal blanks to produce plastic deformation to obtain forgings with certain mechanical properties, certain shapes and sizes. Forging (forging and stamping) is one of the two major components.

Forging flame heating equipment and its application 1-intermittent charging flame heating equipment

Common flame heating equipment for forging is mainly divided into intermittent charging and continuous charging according to the charging method.

Standard of flange gasket

There are many standards for flange gaskets. Guangdong Zhongxiang can customize them according to the physical and chemical characteristics of the medium and the pressure level. Besides, everyone knows that flange gaskets include asbestos rubber gaskets, metal gaskets, four[fú] gaskets, aluminum gaskets, toothed gaskets, stainless steel gaskets, metal winding gaskets, annealed copper gaskets, etc. according to the nature of the material industry. Sealing products. Each flange gasket has its own standards in various industries and applications.

Flange knowledge|What are the difficulties in processing national standard flanges?

Pasting is simple. When processing national standard flanges, the chips are hard and the cutting temperature is high. When the hard chips flow through the rake face, adhesion, welding and other adhesion phenomena will occur, which will affect the external brightness of the processed parts; work hardening requirements It is very strict. When using the national standard flange, there are many factors that affect the performance of the national standard flange. First, the annealing temperature is under ideal conditions, the annealing temperature is low enough to ensure the annealing of the primer sequence, and the annealing temperature is high enough to reduce non-special characteristics. For heterosexual separation, the reasonable annealing temperature is 55°C~70°C. Secondly, it can sometimes be replaced by cutting, powder metallurgy, casting, hot forging, sheet metal forming and other processes, or it can be separated from these processes to form a composite process .
Previous page

Shanxi Shida Forging Co., Ltd

Our company will continue to strengthen contact with customers at home and abroad in the future.



Dongcun Industrial Zone, Dingxiang County, Shanxi Province


Post:Manager Pei +8613994075859 Manager Han +8613834003397

Shanxi Shida Forging Co., Ltd    晋ICP备09006480号   Powered by